Peugeot 405 Manual

Electric window components - removal and refitting
Bodywork and fittings / Electric window components - removal and refitting


Electronic control unit Removal
1 Remove the driver’s door inner trim panel as described in Section 13.

2 The control unit is clipped to a bracket on the rear of the door trim panel (see illustration).

21.2 Disconnecting wiring plug from the electric windows electronic control
21.2 Disconnecting wiring plug from the electric windows electronic control unit

3 Unclip the control unit and withdraw it from the panel.

Refitting
4 Refitting is a reversal of removal. Refit the door trim panel as described in Section 13.

Window switches
5 Refer to Chapter 12.

Window regulator motors
6 The regulator motors are integral with the regulator assemblies, and cannot be obtained separately.

7 Removal and refitting details for the regulator assemblies are given in Section 15.


© 2018 www.peugeot405.ru. All Rights Reserved.