Peugeot 405 Manual

Wiper arm - removal and refitting
Body electrical system / Wiper arm - removal and refitting


Removal
1 Operate the wiper motor, then switch it off so that the wiper arm returns to the at-rest position.

2 Where applicable, disconnect the washer fluid hose from the end of the connector on the scuttle grille panel (see illustration).

16.2 Disconnect the washer fluid hose from the connector
16.2 Disconnect the washer fluid hose from the connector

3 Lift up the wiper arm spindle nut cover, then slacken and remove the spindle nut (see illustration). Lift the blade off the glass, and pull the wiper arm off its spindle. If necessary, the arm can be levered off the spindle using suitable flat-bladed screwdriver.

16.3 Slackening the wiper arm nut
16.3 Slackening the wiper arm nut

Refitting
4 With the wiper arm and spindle splines clean, refit the arm to the spindle. Align the wiper blade with the tape used on removal.

5 Refit the spindle nut, tightening it securely, and clip the nut cover back into position.

6 Reconnect the washer fluid hose.


© 2018 www.peugeot405.ru. All Rights Reserved.